STORM TROOPER
STROM TROOPERS AND TIE FIGHTERS! DRESS UP YOUR MAG, FIGHT THE REBEL SCUM! Burn this onto any Gen 2/3 Mag, and let it fly! Play with your settings, and bring it to life. This design has been optimized for Lightburn, just apply your settings to the layers, and watch the design come to life! Includes Built-in Tool Layer: Dedicated T1/T2 alignment layer for Gen 2/3 Pmag. Frame your artwork on your mag, hit GO, and you are off! What�s Included SVG File: Universal vector file for all laser software. LBRN2 File: Pre-configured Lightburn file with tool layers. Compatibility: Designed specifically for standard PMAG surfaces to ensure the art sits naturally within the magazine's ribs and frame. Designed for Fiber lasers - JPT, MOPA, Raycus, etc. Important: Your Laser, Your Settings Because every laser (Fiber, CO2, Diode) and power wattage is different, you must adjust the speed, power, and frequency settings to suit your specific machine. This file provides the artwork and layout, but you are responsible for applying the settings that work best for your hardware and material and adjusting the size to your desired placement on the surface. Instructions Download & Open: Import the LBRN2 file directly into Lightburn. Align: Use the Tool Layer to frame and center your magazine on the laser bed and adjust the size as necessary. Burn: Ensure your layers are sorted correctly and run them from Top to Bottom. Finish: Wipe down your mag and show off your custom work! License Terms ? Commercial Use: You are welcome to sell physical items (coins, pendants, etc.) that you create using these files. ? No Digital Redistribution: You may not resell, share, or distribute the digital LightBurn or SVG files in any way. Note: This is a DIGITAL DOWNLOAD ONLY. You are purchasing the design files. No physical magazine is included.